Forged 1.25:1, featuring 8620 heat-treated shafts, used to stop unwanted flex and breakage, and also eliminate side thrust loads from one rocker to the other, further reducing unwanted noise.
Pair of complete shafts. Comes with 8 x GB 369 lash caps (for Manley stainless valves), 4 x GB 409A longer studs, and 8x15 heat-treated nuts. Pre lubed and ready to bolt-on. Assembled here from domestic and foreign parts.
Note: You will need to check for coil bind and for retainer bottoming on the guide on every valve. Requires shorter pushrods.
SW#8
Forged 1.45:1, featuring 8620 heat-treated shafts, used to stop unwanted flex and breakage, and also eliminate side thrust loads from one rocker to the other, further reducing unwanted noise.
Pair of complete shafts. Comes with 8 x GB 369 lash caps (for Manley stainless valves), 4 x GB 409A longer studs, and 8x15 heat-treated nuts. Pre lubed and ready to bolt-on. Assembled here from domestic and foreign parts.
Note: You will need to check for coil bind and for retainer bottoming on the guide on every valve. Requires shorter pushrods.
SW#8